U.S. Bellows custom designed single expansion joints for an oil refinery in China. They were fabricated with Incoloy 800H bellows and ASTMA 240TP 304H stainless steel weld ends. The expansion joints have a diameter of 6″ with an overall length of 11″. The assemblies were designed for a spring rate of 362 lb./in., 1″ axial movement at 1112°F and 5 psig. All expansion joints were dye penetrant examined and hydro-tested prior to shipment.
This presentation will briefly touch on the basics of fabric expansion joints; however, is mainly focused on the various designs, material details, and applications. Learn how fabric expansion joints are engineered and fabricated for various applications and the many factors that influence those designs. View the abundance of materials used, including Fluoroplastic and Fluoroelastomer, and their respective capabilities. Take a journey through a Fossil Fired Power Plant and see exactly where fabric expansion joints are required.
August 18th: Compact Spring Support Webinar 10:00 am OR 2:00 pm
August 25th: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
September 1st: Engineered Spring Supports (Practical, Hands-on Approach) Webinar 10:00 am OR 2:00 pm
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now