Request A Quote

20″ Tied Universal Expansion Joint

February 11, 2019

20" Diameter Tied Universal Expansion Joint

20" Diameter Tied Universal Expansion Joint

Expansion Joint Crated for Export

This tied universal expansion joint is fabricated from carbon steel pipe, tie rods and covers, and 304 stainless steel bellows and liners. The overall length of the expansion joint is 72″. The application of this expansion joint is to provide for large lateral movement in a propane dehydrogeneration plant. The expansion joint welds were 100% dye-penetrant examined and hydro-tested prior to shipment

Read More

Fabric Expansion Joints Designed for a Textile Sheets, Polymer and Fiber Plant

February 4, 2019

Fabric Expansion Joints Designed for a Textile Sheets, Polymer and Fiber Plant

 Type:  Fabric Expansion Joint
 Size:  36″ L | 24-1/2″ W | 24-1/2″ L
 Material:  1-Ply ReinForced Silicone Fabric | Carbon Steel
 Design:  300°F @ 3 psig | 6″ Lateral Movement
 Testing:  100% Dye-Penetrant

U.S. Bellows designed fabric expansion joint for a textile sheets, polymer, and fiber plant in Virginia. The dimensions for the expansion joints are 36″ long, 24-1/2″ wide, and 24-1/2″ long. These fabric expansion joints are fabricated of carbon steel flanges with 1-ply reinforced silicone fabric. The expansion joints are designed for 300°F with an operating pressure of 3 psig, and movement of 6” lateral. A dye penetrant examination on the welds was performed prior to shipment.

Read More
Top