Request A Quote

8′-1/2″ Long Rectangular Metallic Expansion Joint Designed with Mitered Corners for a Gas Turbine

November 16, 2014

8'-1/2" Long Rectangular Metallic Expansion Joint Designed with Mitered Corners for a Gas Turbine
U.S. Bellows designed and fabricated a rectangular metallic expansion joint with mitered corners for a gas turbine in New York. This unit’s dimensions are 37″ in width by 102″ in length by 16″ face-to-face. The bellows, frame ends and internal liner are fabricated from 300 series stainless steel. The expansion joint is designed for +/- 100″ water column and for a temperature range of -20°F to 800°F. It is designed for an axial movement of 1/2″ with a lateral offset of 1/2″. A dye penetrant examination and air and soap leak test was performed prior to shipment.

Read More

60″ Dia. Universal Expansion Joint Designed for a Chemical Company

November 2, 2014

60" Dia. Universal Expansion Joint Designed for a Chemical Company
U.S. Bellows, Inc. designed and fabricated a universal expansion joint for chemical company. The expansion joint is 60″ in diameter and 72″ in overall length. This unit is designed for 3.25″ lateral movement with a 3,620 lb./in. axial spring rate, a 131″ water column with a temperature of 220°F. An x-ray test and dye-penetrant examination were conducted on the bellows longitudinal seam weld as well as an air, soap, and bubble test prior to shipment

Read More
Top