Request A Quote

Single Expansion Joints Custom Designed for a Power Generation Application

September 20, 2016
Single Expansion Joints Custom Designed for a Power Generation Application
Type: Single Tied Expansion Joint
Size: 4” in diameter by 9-3/4;” in OAL, to 8” in diameter by 10-7/8” in OAL
Material: 304 Stainless Steel Bellows / Carbon Steel
Design: 400°F at 400 psig
Testing: hydro-tested at 600 psig

U.S. Bellows custom designed these single tied expansion joints for a power generation application in Virginia. The expansion joints vary in size from 4” in diameter by 9-3/4” in OAL, to 8” in diameter by 10-7/8” in OAL. The bellows are fabricated from 304 stainless steel and the rest of the components from carbon steel. The expansion joints are designed for 400°F at 400 psig and are capable of 0.39” of lateral movement. A hydro-test at 600 psig was performed on the units prior to shipment

Read More

9′ Rectangular Metallic Expansion Joint Designed for a Gas Turbine Facility

September 6, 2016

9’ Rectangular Metallic Expansion Joint Designed for a Gas Turbine Facility

Type: Rectangular Expansion Joint
Size: 106″ x 72″ x 15″
Design: 310 Stainless Steel Bellows / Carbon Steel
Material: -20 – 1000°F / +/- 5″ water column
Testing: 100% dye-penetrant tested

U.S. Bellows designed this rectangular expansion joint for a gas turbine facility in California. It was custom designed with one 6″ x 6″ square convolution. The dimensions for unit are 106″ x 72″ x 15″. The bellows was fabricated from 310 stainless steels and the frame from carbon steel. It is designed for an operating temperature from -20°F to +1,000°F at +/- 5″ water column. The unit was 100% dye-penetrant tested prior to shipment.

Read More
Top