Request A Quote

Universal Expansion Joint with 5″ Thick Refractory Lining for a Styrene Plant in Thailand

May 23, 2011

 

universal expansion joint with 5" thick refractory lining

universal expansion joint with 5" thick refractory lining

This universal expansion joint is designed with 5″ thick refractory-lining for a 52″ pipe in a Styrene Plant in Thailand. It measures 154″ long and is fabricated with ASTMA 304H stainless steel pipe ends and Incoloy 800H bellows. The expansion joint is designed for a lateral movement of 6.982″ with a design pressure of 30 psig at 1085°F. The bellows and pipe longitudinal seams and the pipe circumferential welds were x-rayed. All welds were also dye penetrant examined. A pneumatic test between the plies at 15 psig and the complete expansion joint at 45 psig was performed. The carbon steel surfaces were coated with a special three-coat paint system after testing and prior to shipment.

Read More

Duct Work for Absorbing Tower Piping in an Acid Plant

May 9, 2011

Duct Work for Absorbing Tower Piping in an Acid Plant
This duct work was fabricated with mitered elbows from SA-516 grade 70 carbon steel, and was designed for absorbing tower piping in an acid plant. It has a 72″ outside diameter and measures 23″-2/4″ from the centerline, elbow to elbow. This assembly was only a single portion of a duct work system that included 36″, 48″ and 60″ diameter sections of fabricated duct work. The duct work was fabricated with roundness tolerance of +/- 1/8″. A 100% dye penetrant test, soap and air test, and spot x-ray testing of all pipe circumferential and long seam welds was performed prior to shipment.
93646a2

Read More
Top