These universal metallic expansion joints were custom designed for a pipe line in a bioengergy plant. They range from 20″ to 30″ in diameter, and are designed for 2″ lateral movement with a 1,362 lb/in. spring rate. The expansion joints are fabricated entirely from 304 stainless steel and designed for 250°F and 30 psig. Each unit was 100% dye penetrant examined and air tested prior to shipment.
Sign-up for a Live Technical Webinar…
This presentation will briefly touch on the basics of fabric expansion joints; however, is mainly focused on the various designs, material details, and applications. Learn how fabric expansion joints are engineered and fabricated for various applications and the many factors that influence those designs. View the abundance of materials used, including Fluoroplastic and Fluoroelastomer, and their respective capabilities. Take a journey through a Fossil Fired Power Plant and see exactly where fabric expansion joints are required.
April 18th: Engineered Spring Supports (Practical, Hands-on Approach) Webinar 10:00 am OR 2:00 pm
April 25th: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
May 2nd: Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar 10:00 am OR 2:00 pm
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now