Request A Quote

Thick-Wall Flanged and Flued Head Expansion Joints Designed for Boiler and Furnace Replacement

October 15, 2018

Thick-Wall Flanged and Flued Head Expansion Joints Designed for Boiler and Furnace Replacement

Type: Thick-Wall Flanged & Flued Head Expansion Joints
Size: 52-7/8″ I.D. | 83-5/8″ I.D. | 10″ Face-to-Face
Design: ASTM A 516-70 Carbon Steel
Material: 250″ Water Column
Testing: 100% Dye-Penetrant | Soap & Air Leak | Hydro-Tested

U.S. Bellows custom designed thick-wall flanged and flued head expansion joints for a boiler and furnace replacement at a chemical plant in Kentucky. The units were completely fabricated from ASTM A 516-70 carbon steel. The smaller unit’s inside diameter is 52-7/8″ and the larger unit is 83-5/8″. Both units are 10″ face-to-face. They are designed for an operating pressure of 250″ water column. The expansion joints were 100% dye-penetrant tested, soap & air leak tested, and hydro-tested prior shipment.

Pressure 2

Upcoming Live Webinar

Sign-up for a Live Technical Webinar…

View video recordings from past webinars…


Online Course

Expansion Joint Application and Design

Our Expansion Joint course was developed for the following disciplines…

  • Piping system designers that may decide to use expansion joints
  • Expansion joint designers use the information provided by piping system designers to determine the best design to meet the requirements.
  • Designers that use modern software systems to evaluate different options
  • Engineers / Managers: field, maintenance, process, operations, construction, surveyors

*This online course is approved for 8 hrs. P.E. Credits

Register Now
Top