U.S. Bellows designed this thick wall flanged and flued head expansion joint at a sulfuric acid plant in Louisiana. Sulfuric acid plants are located throughout the industrialized world and we have worked with most of them including market leaders. Most are located near their product acid’s point of use, i.e., near fertilizer plants, copper ore leach plants, and petroleum refineries. This is because elemental sulfur is cheaper to transport than sulfuric acid. By far the largest amount of sulfuric acid is used to make phosphoric acid, used, in turn, to make the phosphate fertilizers, calcium dihydrogenphosphate, and ammonium phosphates. It is also used to make ammonium sulfate, which is a particularly important fertilizer in sulfur-deficient. In various concentrations, the acid is used in the manufacture of fertilizers, pigments, dyes, drugs, explosives, detergents, and inorganic salts and acids, as well as in petroleum refining and metallurgical processes.
The expansion joint was fabricated from A516-70 carbon steel and painted with a special epoxy coat for protection from corrosion. The unit is 96″ x 124-1/4″ O.D. All of the butt welds for this expansion joint were 100% liquid penetrant, 100% radiographic, and soap and air bubble tested prior to shipment. This type of joint can be used as a “clamshell” joint used in conjunction with shell and tube heat exchangers, steam exhaust, hot water return lines, or chilled water lines.