 |
  |
These expansion joints measure 18″ in diameter x 11″ in overall length. Each expansion joint is fabricated with 300 lb. stainless steel raised face slip on flanges. The liner, cover, and tie-rods are fabricated from 316L stainless steel. The design pressure is 403 PSI, and the design temperature is 200°F. Dye-penetrant tests, hydro-tests at 604 PSIG, and 100% x-ray tests of the bellows’ longitudinal weld seams were performed to assure quality. |
Sign-up for a Live Technical Webinar…
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.
No upcoming webinars. Please check later.
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now