The burst test is primarily conducted on bellows. Normally, hydraulic pressure is slowly increased until failure occurs. Based on the burst test results, a safety factor is applied. This establishes the ultimate pressure rating.

Burst Testing
US Bellows is a Standards Subscriber | Exp: Dec 31, 2026 | See ejma.org to check verification process
Celebrating over 20 years of EJMA membership
The burst test is primarily conducted on bellows. Normally, hydraulic pressure is slowly increased until failure occurs. Based on the burst test results, a safety factor is applied. This establishes the ultimate pressure rating.
Sign-up for a Live Technical Webinar…
Listen to in-depth explanations on how to choose the type of expansion joint that will best suit your system. Learn about the bellows movements throughout the piping system due to thermal changes of mechanical motion. Increase your understanding of the different types of expansion joints and value-added services offered by U.S. Bellows.
July 10th: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
July 24th: Pipe Support Field Inspection, Installation and Maintenance Webinar 10:00 am OR 2:00 pm
July 31st: U.S. Bellows - Expansion Joints In-depth Webinar 10:00 am OR 2:00 pm
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register NowU.S. Bellows “On-call” Engineering and Manufacturing Team Guarantee a response to your request within 48 hours.
© 2025 U.S. Bellows, Inc. | All Rights Reserved | Privacy Policy | Facilities