These fabric expansion joints were fabricated from stainless steel pipe and flanges with a three layer fabric belt protected by an insulation pillow. Each joint is 44″ ID x 40″ face-to-face and designed for 3 PSIG at 845°F. The expansion joints are designed for a lateral movement of 1/2″ and an angular rotation of 1.5°. Stainless steel covers were included to protect the fabric expansion element from possible outside damage.
Sign-up for a Live Technical Webinar…
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.
No upcoming webinars. Please check later.
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now