U.S. Bellows/PT&P specially designed and fabricated 40 externally pressurized expansion joints for the piping system of a steam plant in Kent, Ohio. The sizes of the expansion joints ranged from 10 to 24. The expansion joints were designed at 150 psig and 350 °F for a maximum of 4 compressions and fabricated with 304 SS bellows and carbon steel shell and flanges. The joints were leak tested before shipment.
Sign-up for a Live Technical Webinar…
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.
No upcoming webinars. Please check later.
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now