U.S. Bellows, Inc fabricated and installed a clamshell bellows for a shell and tube heat exchanger. The clamshell bellows are designed and fabricated per ASME VIII Div. 1 Appendix 26. It has a 14″ diameter and was designed at 150ºF and 150 psig. In order to detect any leaks, prior to and following forming, the heat exchanger and its welds were subjected to a series of tests such as the dye penetrant test (100%), X-ray test (100%) and air test
Sign-up for a Live Technical Webinar…
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.
No upcoming webinars. Please check later.
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now