Request A Quote

Blog

Universal Expansion Joint Refurbished for a Manufacturing Facility in Tennessee
October 26, 2014

Universal Expansion Joints Refurbished for a Manufacturing Facility in Tennessee
This universal expansion joint was refurbished for a manufacturing facility in Tennessee. The bellows were fabricated from 304 stainless steel. The expansion joint was designed for an operating temperature of 475°F and a pressure of 127 psig. The unit is 16″ diameter by 123″ long and it is capable of 3/4″ lateral movement. A dye penetrant exam and hydro-test was conducted prior to shipment.

Read More

Externally Pressurized Expansion Joints Radiographic Tested
October 12, 2014

Externally Pressurized Expansion Joints Radiographic Tested

These externally pressurized expansion joints were custom designed for 8″ axial movement and 150 psig at 176°F, with a spring rate of 2,152 lb./in. They are 16″ in diameter and 60-1/4″ face-to-face. The bellows are fabricated from 304 stainless steel, and the rest of the expansion joint is fabricated from carbon steel. Each unit was hydro-tested, radiographic tested, and dye penetrant tested prior to shipment.

Read More
Top