These externally pressurized expansion joints are 16″ in diameter and 60-1/4″ face-to-face. The bellows are fabricated from 304 stainless steel, and the rest of the expansion joint is fabricated from carbon steel. They are custom-designed for 8″ axial movement and 150 psig at 176°F, with a spring rate of 2,152 lb./in. Each expansion joint was hydro-tested, radiographic tested, and dye penetrant tested prior to shipment.
Sign-up for a Live Technical Webinar…
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.
No upcoming webinars. Please check later.
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now