These expansion joints were designed at 170 PSIG and 450 degrees F. to absorb lateral movements and tested per B31.3. They were made with Inconel® 625LCF bellows and A105 300 lb. RFSO flanges. The entire assembly was hydro-tested at 255 PSIG and held under pressure for four hours. In order to detect any leaks, each expansion joint and its welds were subjected to the dye penetrant-test and the X-ray test, each of which were 100%, prior to and following forming.
Sign-up for a Live Technical Webinar…
Listen to in-depth explanations on how to choose the type of expansion joint that will best suit your system. Learn about the bellows movements throughout the piping system due to thermal changes of mechanical motion. Increase your understanding of the different types of expansion joints and value-added services offered by U.S. Bellows.
November 21st: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
November 28th: Pipe Support Field Inspection, Installation and Maintenance Webinar 10:00 am OR 2:00 pm
December 5th: Slide Plates & Pipe Rollers in the Fight Against Friction 10:00 am OR 2:00 pm
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now