Request A Quote

Neoprene Expansion Joints for a Gas Turbine Application

January 4, 2016

Neoprene Expansion Joints for a Gas Turbine Application

These neoprene expansion joints were designed for a gas turbine application. Each expansion joint is 42″ ID and 7″ OAL. The frame was fabricated from A572 Gr.50 carbon steel, the clamps from 304 stainless steel, and the belt is reinforced neoprene. The expansion joints were designed for -20°F/+200°F with a +/- 100″ water column. A dye penetrant examination on the welds was performed prior to shipment.

Top