Single Expansion Joints – 40 Inch Nominal Diameter
40 Inch Nominal Diameter
EEffective (Thrust) Area: 1358.92 in2 (8771.48 cm2)
Notes:
- Rated life cycle at 650°F is 3000 cycles for any one tabulated movement.
- To combine axial, lateral and angular movements, please refer to the how to order section
- To increase cycle life or movements, please refer to the graph on cycle life
- Rated bellows extension is equal to rated axial movement. Provided bellows is precompressed the amount of design extension. Installed overall length will decrease by the amount of precompression.
- Maximum test pressure: 1.5 X rated working pressure.
- Bellows rated for 650°F: For appropriate flange temperature/pressure ratings, see catalog flange data
- Torsional spring rate data provided only for modeling expansion joints on computer stress programs. Please consult factory for allowable torsional loadings.
- Overall lengths and weights for unrestrained expansion joints only. Consult factory for information regarding tied, hinged, or gimbal expansion joints.
- Pressure thrust load applied to adjacent pipe anchors/equipment when unrestrained expansion joints are used.
| Dia | Pressure | Overall Length and Weight | Non-concurrant movements | Spring rates | ||||||||||
| Flanged Ends | Weld Ends | Combination Ends | Axial | Lateral | Angular | Axial | Lateral | Angular | Torsional | |||||
| Overall Length | Weight | Overall Length | Weight | Overall Length | Weight | Compression | ||||||||
| PSIG | in. | lb. | in. | lb. | in. | lb. | in. | in. | deg. | lb./in. | lb./in. | in./lb./deg. | in./lb./deg. x 106 |
|
| kg/cm 2 | mm | kg | mm | kg | mm | kg | mm | mm | Grad | kg/mm | kg/mm | N-M/Grad | N-M/Grad x 105 |
|
| 40 | 45 | 12 | 598 | 16 | 153 | 14 | 375 | 3.98 | 0.27 | 10 | 689 | 24670 | 2592 | 7.8763 |
| 3.2 | 305 | 272 | 406 | 69.5 | 356 | 170 | 101 | 6.86 | 11 | 12 | 441 | 263.6 | 8.0102 | |
| 45 | 18 | 622 | 22 | 177 | 20 | 399 | 6.8 | 0.79 | 10 | 413 | 5086 | 1555 | 4.7052 | |
| 3.2 | 457 | 283 | 559 | 80.5 | 508 | 181 | 173 | 20.1 | 11 | 7 | 91 | 158.1 | 4.7852 | |
| 45 | 24 | 645 | 28 | 200 | 26 | 423 | 9.62 | 1.58 | 10 | 295 | 1818 | 1111 | 3.3546 | |
| 3.2 | 610 | 293 | 711 | 90.9 | 660 | 192 | 244 | 40.1 | 11 | 5 | 33 | 113 | 3.4117 | |
| 40 | 120 | Customer to specify flange configuration. Weights and O.A.L. will be furnished upon receipt of this information. | 16 | 169 | Customer to specify flange configuration. Weights and O.A.L. will be furnished upon receipt of this information. | 2.29 | 0.15 | 6 | 3177 | 128531 | 11964 | 14.222 | ||
| 8.4 | 406 | 76.8 | 57.2 | 3.81 | 7 | 57 | 2300 | 1216.7 | 14.4638 | |||||
| 120 | 22 | 207 | 4.01 | 0.45 | 10 | 1815 | 23983 | 6837 | 8.1269 | |||||
| 8.4 | 559 | 94.1 | 102 | 11.4 | 11 | 32 | 429 | 695.3 | 8.265 | |||||
| 120 | 28 | 245 | 5.73 | 0.92 | 10 | 1271 | 8226 | 4786 | 5.6888 | |||||
| 8.4 | 711 | 111 | 146 | 23.4 | 11 | 23 | 147 | 486.7 | 5.7855 | |||||
| 40 | 225 | 16 | 258 | 2.19 | 0.14 | 6 | 6366 | 258136 | 24028 | 14.7725 | ||||
| 15.8 | 406 | 117 | 55.6 | 3.56 | 7 | 114 | 4619 | 2443.6 | 15.0237 | |||||
| 225 | 22 | 331 | 3.83 | 0.43 | 10 | 3637 | 48165 | 13731 | 8.4414 | |||||
| 15.8 | 559 | 150 | 97.3 | 10.9 | 11 | 65 | 862 | 1396.4 | 8.5849 | |||||
| 225 | 28 | 405 | 5.47 | 0.88 | 10 | 2546 | 16521 | 9611 | 5.909 | |||||
| 15.8 | 711 | 184 | 139 | 22.4 | 11 | 46 | 296 | 977.4 | 6.0095 | |||||
Materials
Bellows: A240-T304. Alternate materials available upon request. Refer to the materials section
Flanges: ASTM A105.
45 PSIG Series: 125 lb. Lt. Wt. FFSO.
For 120 psig and 225 psig Series: Customer to specify actual flanges required.
Plate flanges and angle flanges available for low pressure systems.
Pipe: ASTM A285-C.
45 PSIG Series: 0.375-inch wall.
120 PSIG Series: 0.375-inch wall.
225 PSIG Series: 0.500-inch wall.
Liners: A240-T304.
Covers: Carbon steel.
Tie Rods, Hinges, Gimbals: Carbon steel