These expansion joints were designed at 170 PSIG and 450 degrees F. to absorb lateral movements and tested per B31.3. They were made with Inconel® 625LCF bellows and A105 300 lb. RFSO flanges. The entire assembly was hydro-tested at 255 PSIG and held under pressure for four hours. In order to detect any leaks, each expansion joint and its welds were subjected to the dye penetrant-test and the X-ray test, each of which were 100%, prior to and following forming.
Sign-up for a Live Technical Webinar…
Get to know U.S. Bellows from introducing our team and manufacturing capabilities to exploring design details in technical drawings for large-scale projects. View case studies that lead to the creation of new standards and designs. Learn about cost-saving measures for expansion joint failures and how to prevent future problems.
December 26th: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
January 2nd: Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar 10:00 am OR 2:00 pm
January 16th: Pipe Clamp Design, Application & Installation Webinar 10:00 am OR 2:00 pm
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now