Request A Quote

30″ Dia. Hinged Expansion Joints Designed for a Pipeline in Mexico

February 16, 2016

141772a1

 

U.S. Bellows designed this hinged expansion joint for a pipeline in Mexico. It is 30″ in diameter and 18″ in length. The bellows are fabricated from 304 stainless steel, and the remainder of the assembly is carbon steel. The expansion joint is designed for an operating pressure of 25 psig at 986°F, with an angular movement of 4.5°. All units in this project were 100% dye-penetrant and hydro-tested prior to shipment.

Read More

Neoprene Expansion Joints Designed for a Generator Fan in a Gas Turbine Facility

February 1, 2016

Neoprene Expansion Joints Designed for a Generator Fan in a Gas Turbine Facility

U.S. Bellows designed these EPDM neoprene fabric expansion joints for a generator fan application at a gas turbine facility. The expansion joints are 54″ in diameter and 15″ OAL. Each unit was fabricated has an EPDM fabric belt, stainless steel band clamps, and carbon steel angle flanged ends. The expansion joints are designed for -20°F/+200°F at +/- 100″ water column. A 100% dye penetrant examination on all carbon steel welds was conducted on all units prior to shipment.

Read More
Top