The objective of the burst test is to determine the ultimate pressure resistance. This test is primarily conducted on bellows. Normally, hydraulic pressure is slowly increased until failure occurs. Based on the burst test results, a safety factor is applied. This establishes the ultimate pressure rating.
Listen to in-depth explanations on how to choose the type of expansion joint that will best suit your system. Learn about the bellows movements throughout the piping system due to thermal changes of mechanical motion. Increase your understanding of the different types of expansion joints and value-added services offered by U.S. Bellows.
June 16th: Pipe Supports and Expansion Joints for Furnace Applications Webinar 10:00 am OR 2:00 pm
June 23rd: Pipe Support Field Inspection, Installation and Maintenance Webinar 10:00 am OR 2:00 pm
June 30th: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now