This 118″ diameter tied universal expansion joint was designed for steam service in a power plant in Alaska. The expansion joint duct, tie rods and cover are fabricated from carbon steel with 304 stainless steel bellows and liner. The overall length is 225″. It was designed for 250°F at 7.25 PSIG and 3.52Pquot; of lateral movement. Dye-penetrant testing, spot x-ray and an air and soap test were performed on the universal expansion joint assembly prior to shipping.
Upcoming Live Webinar
Sign-up for a Live Technical Webinar…
Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar
Date: Thursday, June 1, 2023 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on the different types of variable spring supports and big ton variable spring supports. Learn about the special features available, in addition to the design of a variable support. View how the different coil configurations produce a unique response to an applied load and see how a spring assembly is loaded. Discover the basic steps in selecting a hanger design and the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to replace or re-calibrate a variable spring support, as well as adjustments, shutdown, and isolation procedures.
No upcoming webinars. Please check later.
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
- Piping system designers that may decide to use expansion joints
- Expansion joint designers use the information provided by piping system designers to determine the best design to meet the requirements.
- Designers that use modern software systems to evaluate different options
- Engineers / Managers: field, maintenance, process, operations, construction, surveyors
*This online course is approved for 8 hrs. P.E. CreditsRegister Now