 |
Various sizes of thick wall flanged and flued head expansion joints were custom designed for heat exchangers in California. Two are 30″ in diameter and two are 18″ in diameter. They were designed for 1″ axial extension and 14 psig at 300°F. All four expansion joints were fabricated from ASTM A-516 Gr. 70 carbon steel material. A dye penetrant exam was conducted prior to shipping.
Sign-up for a Live Technical Webinar…
Listen to in-depth explanations on how to choose the type of expansion joint that will best suit your system. Learn about the bellows movements throughout the piping system due to thermal changes of mechanical motion. Increase your understanding of the different types of expansion joints and value-added services offered by U.S. Bellows.
November 21st: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
November 28th: Pipe Support Field Inspection, Installation and Maintenance Webinar 10:00 am OR 2:00 pm
December 5th: Slide Plates & Pipe Rollers in the Fight Against Friction 10:00 am OR 2:00 pm
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
*This online course is approved for 8 hrs. P.E. Credits
Register Now