U.S. Bellows custom designed universal expansion joints for an oil refinery in the Philippines. The bellows and liner are fabricated from 304 stainless steel and the cover, tie rods, flanges and pipe spool are carbon steel. The sizes are 18″ dia. x 60.5″ long, 28″ dia. x 80.75″ and 36″ dia. x 40″ long. The units are designed with movement indicators and for 50 psig at 655°F. They are capable of 0.675″ compression, 0.375″ lateral and 1″ angular. The bellows and pipes were 100% x-rayed, PMI examined and hydro-tested
Upcoming Live Webinar
Sign-up for a Live Technical Webinar…
Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar
Date: Thursday, June 1, 2023 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on the different types of variable spring supports and big ton variable spring supports. Learn about the special features available, in addition to the design of a variable support. View how the different coil configurations produce a unique response to an applied load and see how a spring assembly is loaded. Discover the basic steps in selecting a hanger design and the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to replace or re-calibrate a variable spring support, as well as adjustments, shutdown, and isolation procedures.
No upcoming webinars. Please check later.
View video recordings from past webinars…
Expansion Joint Application and Design
Our Expansion Joint course was developed for the following disciplines…
- Piping system designers that may decide to use expansion joints
- Expansion joint designers use the information provided by piping system designers to determine the best design to meet the requirements.
- Designers that use modern software systems to evaluate different options
- Engineers / Managers: field, maintenance, process, operations, construction, surveyors
*This online course is approved for 8 hrs. P.E. CreditsRegister Now