Single Expansion Joints – 60 Inch, 66 Inch, 72 Inch Nominal Diameter

60 Inch, 66 Inch, 72 Inch Nominal Diameter

Notes:

Rated life cycle at 650°F is 3000 cycles for any one tabulated movement.
To combine axial, lateral and angular movements, please refer to the how to order section
To increase cycle life or movements, please refer to the graph on cycle life
Rated bellows extension is equal to rated axial movement. Provided bellows is precompressed the amount of design extension. Installed overall length will decrease by the amount of precompression.
Maximum test pressure: 1.5 X rated working pressure.
Bellows rated for 650°F: For appropriate flange temperature/pressure ratings, see catalog flange data
Torsional spring rate data provided only for modeling expansion joints on computer stress programs. Please consult factory for allowable torsional loadings.
Overall lengths and weights for unrestrained expansion joints only. Consult factory for information regarding tied, hinged, or gimbal expansion joints.
Pressure thrust load applied to adjacent pipe anchors/equipment when unrestrained expansion joints are used.

Diameter	Pressure	Overall Length and Weight						Non-concurrant movements			Spring rates


		Flanged Ends		Weld Ends		Combination Ends		Axial	Lateral	Angular	Axial	Lateral	Angular	Torsional


		Overall Length	Weight	Overall Length	Weight	Overall Length	Weight	Compression
	PSIG	in.	lb.	in.	lb.	in.	lb.	in.	in.	deg.	lb./in.	lb./in.	in./lb./deg.	in./lb./deg. x 106


	kg/cm 2	mm	kg	mm	kg	mm	kg	mm	mm	Grad	kg/mm	kg/mm	N-M/Grad	N-M/Grad x 105


60	60	13	1343	16	236	15	789	2.65	0.11	5	3353	345665	28280	63.0276
60	4.2	330	610	406	107	381	359	67.3	2.79	5	60	6186	2876.1	64.0991
Effective Area		21	1401	24	294	23	848	5.31	0.44	10	1677	40465	14140	31.2608
Effective Area		533	637	610	134	584	385	135	11.2	11	30	724	1438	31.7923
3036 in2		29	1459	32	353	31	906	8.14	1.03	10	1118	11736	9427	20.785
19,587 cm2		737	663	813	160	787	412	207	26.2	11	20	210	958.7	21.1383
66	55	13	1569	16	260	15	914	2.67	0.1	5	3694	457820	37455	83.8532
66	3.8	330	713	406	118	381	415	67.8	2.54	5	66	8193	3809.2	85.2787
Effective Area		21	1633	24	324	23	978	5.45	0.41	9	1847	53595	18728	41.5901
Effective Area		533	742	610	147	584	445	1.38	10.4	10	33	959	1904.6	42.2971
3650 in2		29	1697	32	388	31	1043	8.17	0.94	10	1231	15544	12485	27.6527
23,550 cm2		737	771	813	176	787	474	208	23.9	11	22	278	1269.7	28.1228
72	50	13	1775	16	283	15	1029	2.7	0.09	4	4035	591934	48428	108.8247
72	3.5	330	807	406	129	381	468	68.6	2.29	5	72	10593	4925.1	110.6748
Effective Area		21	1845	24	53	23	1099	5.51	0.38	9	2017	69295	24214	53.9756
Effective Area		533	839	610	160	584	500	140	9.65	9	36	1240	2462.6	54.8932
4321 in2		29	1915	32	423	31	1169	8.26	0.87	10	1345	20097	16143	35.8877
27,877 cm2		737	870	813	192	787	531	210	22.1	11	24	360	1641.7	36.4978

Materials
Bellows: A240-T304. Alternate materials available upon request. Refer to the materials section
Flanges: ASTM A105.
50-60 PSIG Series: 125 lb. Lt. Wt. FFSO.
Plate flanges and angle flanges available for low-pressure systems.
Pipe: ASTM A285-C.
50-60 PSIG Series: 0.375-inch wall.
Liners: A240-T304.
Covers: Carbon steel.
Tie Rods, Hinges, Gimbals: Carbon steel

Download PDF