Single Expansion Joints – 4 Inch Nominal Diameter
4 Inch Nominal Diameter
Effective (Thrust) Area: 20.87 in2 (134.64 cm2)
Notes:
- Rated life cycle at 650°F is 3000 cycles for any one tabulated movement.
- To combine axial, lateral and angular movements, please refer to the…how to order section
- To increase cycle life or movements, please refer to the graph on…cycle life
- Rated bellows extension is equal to rated axial movement. Provided bellows is precompressed the amount of design extension. Installed overall length will decrease by the amount of precompression.
- Maximum test pressure: 1.5 X rated working pressure.
- Bellows rated for 650°F: For appropriate flange temperature/pressure ratings, see…catalog flange data
- Torsional spring rate data provided only for modeling expansion joints on computer stress programs. Please consult factory for allowable torsional loadings.
- Overall lengths and weights for unrestrained expansion joints only. Consult factory for information regarding tied, hinged, or gimbal expansion joints.
- Pressure thrust load applied to adjacent pipe anchors/equipment when unrestrained expansion joints are used.
Dia | Pressure | Overall Length and Weight | Non-concurrant movements | Spring rates | ||||||||||
Flanged Ends | Weld Ends | Combination Ends | Axial | Lateral | Angular | Axial | Lateral | Angular | Torsional | |||||
Overall Length | Weight | Overall Length | Weight | Overall Length | Weight | Compression | ||||||||
PSIG | in. | lb. | in. | lb. | in. | lb. | in. | in. | deg. | lb./in. | lb./in. | in. | in./lb./deg. x 106 | |
kg/cm 2 | mm | kg | mm | kg | mm | kg | mm | mm | Grad | kg/mm | kg/mm | N-M/Grad | N-M/Grad x 105 | |
4 | 100 | 6 | 27 | 12 | 9 | 9 | 18 | 1.23 | 0.27 | 10 | 222 | 774 | 13 | 0.0168 |
7 | 152 | 12.3 | 305 | 4.09 | 229 | 818 | 31.2 | 6.96 | 11 | 4 | 14 | 1.3 | 0.017 | |
65 | 9 | 28 | 15 | 10 | 12 | 19 | 2.49 | 1.03 | 10 | 118 | 115 | 7 | 0.0089 | |
4.6 | 229 | 12.7 | 381 | 4.55 | 305 | 8.64 | 63.2 | 26.2 | 11 | 2 | 2 | 0.7 | 0.009 | |
30 | 12 | 29 | 18 | 11 | 15 | 20 | 3.89 | 2.36 | 10 | 80 | 36 | 5 | 0.006 | |
2.1 | 305 | 13.2 | 457 | 5 | 381 | 9.09 | 98.8 | 59.9 | 11 | 1 | 1 | 0.5 | 0.0061 | |
4 | 275 | 6 | 45 | 10 | 9 | 8 | 27 | 0.46 | 0.07 | 10 | 1549 | 12199 | 90 | 0.0433 |
19.3 | 152 | 20.5 | 254 | 4.09 | 203 | 12.3 | 11.7 | 1.78 | 11 | 28 | 218 | 9.2 | 0.0441 | |
275 | 9 | 47 | 13 | 11 | 11 | 29 | 1.07 | 0.36 | 10 | 664 | 960 | 38 | 0.0186 | |
19.3 | 229 | 21.4 | 330 | 5 | 279 | 13.2 | 27.2 | 9.14 | 11 | 12 | 17 | 3.9 | 0.0189 | |
175 | 12 | 48 | 16 | 12 | 14 | 30 | 1.81 | 0.96 | 10 | 423 | 247 | 24 | 0.0118 | |
12.3 | 305 | 21.8 | 406 | 5.45 | 356 | 13.6 | 46 | 24.4 | 11 | 8 | 4 | 2.4 | 0.012 |
Materials
Bellows: A240-T304. Alternate materials available upon request. Refer to the… materials section
Flanges: ASTM A105.
30-100 PSIG Series: 150 lb. ANSI B16.5 RFSO.
175-275 PSIG Series: 300 lb. ANSI B16.5 RFSO
Plate flanges and angle flanges available for low-pressure systems.
Pipe: ASTM A53/A106.
30-100 PSIG Series: Std. Wt. Pipe.
175-275 PSIG Series: Std. Wt. Pipe
Liners: A240-T304.
Covers: Carbon steel.
Tie Rods, Hinges, Gimbals: Carbon steel