Single Expansion Joints – 30 Inch Nominal Diameter
30 Inch Nominal Diameter
Effective (Thrust) Area: 784.07 in2 (5057.25 cm2)
Notes:
- Rated life cycle at 650°F is 3000 cycles for any one tabulated movement.
- To combine axial, lateral and angular movements, please refer to the how to order section
- To increase cycle life or movements, please refer to the graph on cycle life
- Rated bellows extension is equal to rated axial movement. Provided bellows is precompressed the amount of design extension. Installed overall length will decrease by the amount of precompression.
- Maximum test pressure: 1.5 X rated working pressure.
- Bellows rated for 650°F: For appropriate flange temperature/pressure ratings, see catalog flange data
- Torsional spring rate data provided only for modeling expansion joints on computer stress programs. Please consult factory for allowable torsional loadings.
- Overall lengths and weights for unrestrained expansion joints only. Consult factory for information regarding tied, hinged, or gimbal expansion joints.
- Pressure thrust load applied to adjacent pipe anchors/equipment when unrestrained expansion joints are used.
| Dia | Pressure | Overall Length and Weight | Non-concurrant movements | Spring rates | ||||||||||
| Flanged Ends | Weld Ends | Combination Ends | Axial | Lateral | Angular | Axial | Lateral | Angular | Torsional | |||||
| Overall Length | Weight | Overall Length | Weight | Overall Length | Weight | Compression | ||||||||
| PSIG | in. | lb. | in. | lb. | in. | lb. | in. | in. | deg. | lb./in. | lb./in. | in./lb./deg. | in./lb./deg. x 106 |
|
| kg/cm 2 | mm | kg | mm | kg | mm | kg | mm | mm | Grad | kg/mm | kg/mm | N-M/Grad | N-M/Grad x 105 |
|
| 30 | 50 | 12 | 328 | 16 | 114 | 14 | 221 | 3.98 | 0.36 | 10 | 514 | 10605 | 1114 | 3.3278 |
| 3.5 | 305 | 149 | 406 | 51.8 | 356 | 100 | 101 | 9.14 | 11 | 9 | 190 | 113.3 | 3.3844 | |
| 50 | 18 | 346 | 22 | 132 | 20 | 239 | 6.8 | 1.04 | 10 | 308 | 2187 | 669 | 1.988 | |
| 3.5 | 457 | 157 | 559 | 60 | 508 | 109 | 173 | 26.4 | 11 | 6 | 39 | 68 | 2.0218 | |
| 35 | 24 | 364 | 28 | 150 | 26 | 257 | 9.62 | 2.08 | 10 | 220 | 781 | 478 | 1.4174 | |
| 2.5 | 610 | 165 | 711 | 68.2 | 660 | 117 | 244 | 52.8 | 11 | 4 | 14 | 48.6 | 1.4415 | |
| 30 | 135 | Customer to specify flange configuration. Weights and O.A.L. will be furnished upon receipt of this information. | 16 | 127 | Customer to specify flange configuration. Weights and O.A.L. will be furnished upon receipt of this information. | 2.27 | 0.19 | 8 | 2370 | 55283 | 5146 | 6.0143 | ||
| 9.5 | 406 | 57.7 | 57.7 | 4.83 | 9 | 42 | 989 | 523.3 | 6.1165 | |||||
| 135 | 22 | 155 | 3.97 | 0.59 | 10 | 1354 | 10315 | 2941 | 3.4367 | |||||
| 9.5 | 559 | 70.5 | 101 | 15 | 11 | 24 | 185 | 299.1 | 3.4952 | |||||
| 135 | 28 | 183 | 5.67 | 1.2 | 10 | 948 | 3538 | 2058 | 2.4057 | |||||
| 9.5 | 711 | 83.2 | 144 | 30.5 | 11 | 17 | 63 | 209.3 | 2.4466 | |||||
| 30 | 290 | 16 | 193 | 2.12 | 0.18 | 8 | 4752 | 111181 | 10349 | 6.262 | ||||
| 20.4 | 406 | 87.7 | 53.8 | 4.57 | 9 | 85 | 1990 | 1052.5 | 6.3684 | |||||
| 290 | 22 | 248 | 3.7 | 0.55 | 10 | 2715 | 20745 | 5914 | 3.5783 | |||||
| 20.4 | 559 | 113 | 94 | 14 | 11 | 48 | 371 | 601.5 | 3.6391 | |||||
| 290 | 28 | 303 | 5.29 | 1.12 | 10 | 1901 | 7116 | 4140 | 2.5048 | |||||
| 20.4 | 711 | 138 | 134 | 28.4 | 11 | 34 | 127 | 421 | 2.5474 | |||||
Materials
Bellows: A240-T304. Alternate materials available upon request. Refer to the materials section
Flanges: ASTM A105.
35-50 PSIG Series: 125 lb. Lt. Wt. FFSO
For 135 psig and 290 psig Series: Customer to specify actual flanges required.
Plate flanges and angle flanges available for low pressure systems.
Pipe: ASTM A285-C.
35-50 PSIG Series: 0.375-inch wall.
135 PSIG Series: 0.375-inch wall.
290 PSIG Series: 0.500-inch wall.
Liners: A240-T304.
Covers: Carbon steel.
Tie Rods, Hinges, Gimbals: Carbon steel